Choosing a Makita circular saw for your home improvement projects is an excellent choice as these tools are extremely convenient to have around. Whether you are looking to replace your floors or build a cabinet for extra storage this tool is simply a must have. Before getting started, there are several factors that you will need to take into consideration which are absolutely important.
Safety features are absolutely critical as the last thing you want is causing serious injuries to yourself which could have easily been prevented. Starting a new project is loads of fun but you need to be especially careful when handing an electric circular saw as they are very powerful. Look for a saw that has electric brakes as this ensures the blades immediately stop working after you release the trigger.
In addition, be sure that there are safety locks which secure the blades in place when you are not using it or when you need to switch out the blades to something else. When operating the device, it’s always a good idea to wear safety glasses even if you are operating cordless circular saws. You simply never know when a piece of wood might splinter off and aim towards your face.
Depending on the type of wood you plan on cutting with your Makita circular saw, you always want to make sure that you are using the right type of blade. Not only will this make your job much easier, but it will also ensure a longer life for your tool. Most saws these days enable you to pivot in an up and down motion in addition to being able to move from 0 to 45 degrees left and right for beveled cuts.
Whether you are doing rip cuts, cross cuts or cutting with the grain these tools are extremely versatile and most even come with a guidance system to ensure a more precise cut. Just be sure to always read the instruction manual before getting started. The following are reviews of power tools from Makita that enable you to cut through wood, metal or concrete with a circular saw and the right blade.
Makita 5007MG magnesium 7 1/4 inch circular saw
This saw from Makita is built with a magnesium frame which ensures even better stability and control so you can get precise cuts every time. Be able to switch from 0 to 45 degrees is a very simple task using the positive stops that can be found on the levels. The ruler markers that are found on the base and depth are easy to read and can be adjusted accordingly.
This saw is built with a 15 amp industrial motor and can rev up to 5,800 RPM to deliver even more powerful that is strong enough to keep up with any demands. This tool is very well balanced and the front and rear handles are easy to grip and guide. Your purchase also includes a 1 year warranty should any parts need to be replaced or if it should not work properly the first time around.
Makita 5007FK 7 1/4 inch circular saw with LED lighting
This well balanced saw ensures superior handling and performance which includes a 15 amp motor that can rev up to 5,800 RPM to deliver true power. The LED lights help to illuminate any line that is drawn on the material so you get a more precise cut. Included with your purchase is a bladed tipped with carbide, a blade wrench, rip fence and plastic tool case.
For optimal durability, this tool is wrapped with heavy duty aluminum which is sure to withstand years of abuse at work sites. The ability to do bevel cuts is also a simple task as you can quickly change from 0 to 45 degrees and has a maximum cutting capacity of 2 3/8 inches at 90 degrees. The innovative centrifugal fan is also a nice addition as it helps provide efficient cooling for the motor.
Makita 5377MG magnesium 7 1/4 inch hypoid saw
This circular saw from Makita is built with a magnesium frame similar to the models reviewed above and even has sealed gear housing. The built in fan is also a nice addition to ensure that the unit is operating at its best and that it is always kept cool. Unlike traditional worm drive gears, the hypoid steel gears do not prematurely wear out so you can be sure that it will last for many years to come.
The 15 amp motor is able to rev up to 4,500 RPM and can easily cut through the densest lumber assuming you have the right blade for the task. The saw also has a large cutting capacity of 2 3/8 inches up to 90 degrees with positive stops at 22.5, 45 and 51.5 degrees. Weighing in at 13 pounds and costing about $150 at most online retail stores, this saw is a perfect addition to your tool set.
Makita BSS611Z lithium ion 6 1/2 inch portable cordless circular saw
This saw is a perfect example of Makita’s commitment to delivering innovative technology to make your job that much easier. For reduced operator fatigue, this unit weighs only 7 pounds and is extremely easy to guide through to you get precise cuts every time. Ripping through all types of wood is made possible with its 3,700 RPM motor which also has a lithium ion battery for longer life.
Like the saws reviewed above, this has a cutting capacity of 2 1/4 inch at 90 degrees and even has a 50 degree maximum bevel cutting capacity. This tool is built with precision machinery to ensure smooth and accurate cutting. This unit can be bought brand new at about $100 and even comes with a 3 year warranty should any of the parts need to be replaced which is highly unlikely.
As you can probably imagine by now, buying a Makita circular saw is an excellent investment and one that will prove to be beneficial for a long time. If you want a heavy duty circular saw, then consider getting one that is corded as they offer much more power compared to cordless models. You may need to purchase an extension cord if your work space is far away from an electrical outlet.
However, using a portable circular saw is also beneficial and you may want to consider purchasing both as these units can easily be transported from one place to another. Always be sure that you use the right circular saw blade as the different types will make a significant difference. Power tools are absolutely essential to have if you are serious about making any type of renovations to your home.
Comments on this entry are closed.